Professional Community for Car Dealers, Marketing, Advertising and Sales Leaders
The greatest advantage of being a DIY mechanic is the large selection of tools you have to choose from. There are so many modern options for making your job in the garage easier. This may also present a confusing scenario when selecting a tool for a particular task. It is, therefore, important to know what you want to achieve and what tools will help to get you there. Here are some of the best basics to have on hand.
This is a long non-ratcheting bar used to remove lug nuts and bolts that are rusted. It needs a lot of care to avoid the bolt head from breaking. It is also used when removing tightly torqued bolts because it offers the extra leverage needed because of its length. A breaker bar is almost similar to a lug wrench, but it has a pivoting head that lets you get into tight spaces.
A jack stand's height can be varied and is used to support a vehicle that is raised by a car jack. It is important for these tools to go hand in hand because the stands offer better support when used together with the car jack. It is also much safer to use. Ultimately, if you own a 1ton jack, it is advisable to get a pair of 1ton jack stands.
This is a type of wrench that has a socket attached on one end and is an important item to have in your toolkit because it offers a mechanical advantage to the DIY mechanic. It acts almost like a torque wrench, and the two can be used interchangeably. This toolkit is versatile as it comes in 1/2 and 3/8 inch drive sockets. It is integral to have an idea of the bolts and nuts that your automobile uses. This set comes in either metric (mm) or SAE (inches). A mechanic would have to know this specification and choose a set that would be the most applicable.
The importance of having a service manual in the toolset is often overlooked. As a DIY mechanic, you should have a repair and service manual for your car make and model. The manual will offer you the torque values for the nuts and bolts you are likely to meet when you take apart your automobile. It will help so that nuts are not too tight or too loose. Use a good case or rack to keep these small parts organized (http://www.allcases.com/product-category/c-1276-tool-cases/).
This is one of the highly-recommended brake bleeding kits that makes work much easier. It gives you a quick and efficient way to bleed fluid lines in the vehicle's brake system. It pushes the new brake fluid through the master cylinder and removes the old fluid and air out of the bleed screw. The process is cleaner and more enjoyable.
As a DIY mechanic, having adequate knowledge of the tools you need for every fix makes the process simpler. The result will be more focus on fixing your automobile, as opposed to trying to figure out what tools you have and which one to use.